1. Attachments are working again! Check out this thread for more details and to report any other bugs.

Recent Activity

Activity stream for all registered members at PriusChat.

  1. Ernie stires liked mr_guy_mann's post in the thread Help programming Smartkey for auto unlock & start? Initially worked from pocket. help restore? 2008.

    First thing is to check that the SKS is turned on. If you look under the steering column at the dashboard, there are 2 buttons. The...

    Jun 2, 2024 at 11:22 AM

  2. mr_guy_mann replied to the thread Autel Maxi AP200 - go buy this.

    Getting flash codes can be useful - IF all you have is a paperclip AND the codes are in a system that supports flash codes (like brake...

    Jun 2, 2024 at 11:22 AM

  3. Ernie stires liked dvdirv's post in the thread Prius Myths and their Rebuttals.

    My favorite myth is that you can't really save that much money on gas over time since the Prius costs so much more than a non-hybrid....

    Jun 2, 2024 at 11:18 AM

  4. Ernie stires liked mr_guy_mann's post in the thread Fuel Injectors $$$.

    Here's a few questions: Have you done oil analysis on your other Gen2- are they any different? I would expect (guess) that more stop &...

    Jun 2, 2024 at 11:16 AM

  5. Ernie stires liked Leadfoot J. McCoalroller's post in the thread Fuel Injectors $$$.

    The fuel trims that mr_guy_mann referenced in post #16 bear heavily on your injector theory. I think that should be the first thing you...

    Jun 2, 2024 at 11:14 AM

  6. Mendel Leisk replied to the thread No Ready Mode.

    With brake pedal depressed one push “should” get you into Ready. There’s a gizmo at brake pedal to detect if it’s depressed, maybe not...

    Jun 2, 2024 at 11:10 AM

  7. Ernie stires liked mr_guy_mann's post in the thread Fuel Injectors $$$.

    What are your total fuel trims in ECM data (at hot idle, cruise, and moderate acceleration)? If fuel injectors are leaking (or bad...

    Jun 2, 2024 at 11:08 AM

  8. Ernie stires replied to the thread Remanufactured denso coil.

    Good thought, yes the dialectic grease is good, seals and waterproofs the connection. The replacement coil I bought, not Denso, had a...

    Jun 2, 2024 at 11:04 AM

  9. Danno5060 liked Brian1954's post in the thread No Ready Mode.

    I am assuming that you have not gotten the car to start after you created this thread back in April:...

    Jun 2, 2024 at 11:02 AM

  10. Ernie stires liked highmilesgarage's post in the thread Remanufactured denso coil.

    is this sold from "eBay" or "amazon" ? never heard of rebuild ignition coils before.. common issue with the ignition coils are usually...

    Jun 2, 2024 at 11:02 AM

  11. Ernie stires liked pasadena_commut's post in the thread Remanufactured denso coil.

    In this context "remanufactured" almost certainly means "brush off the dust and change the boot on the bottom if it is visibly cracked...

    Jun 2, 2024 at 11:01 AM

  12. Danno5060 liked mr_guy_mann's post in the thread Remanufactured denso coil.

    No? I've never even thought about the possibility of something like that. Sounds like getting a rebuilt light bulb. Posted via the...

    Jun 2, 2024 at 11:01 AM

  13. Ernie stires liked mr_guy_mann's post in the thread Remanufactured denso coil.

    No? I've never even thought about the possibility of something like that. Sounds like getting a rebuilt light bulb. Posted via the...

    Jun 2, 2024 at 11:01 AM

  14. Ernie stires replied to the thread Remanufactured denso coil.

    Yes, that’s what happened to one of mine, big miss, code, pulled it out and the case was split open! Well I’m thinking these...

    Jun 2, 2024 at 11:01 AM

  15. Ernie stires liked Tombukt2's post in the thread Remanufactured denso coil.

    I mean unless it's easy to split the hermetic seal there and open up the plastic case and take out the stuff that's worn out inside the...

    Jun 2, 2024 at 10:58 AM
Show older items
Loading...